Hi

NetWare 5.1 sp6. Arcserve 11. Backup up several volumes on a remote
server. The data and apps vol backup just fine but the sys vol gets the
e3015 error. I added rights for the backup ID to the volume and did a
trustee repair. Still not working.

Any clue?

Thanks

Will

Hi Will,

E3015 is usually a communications error. On remote server, 3
connections are make, a data connection, a TSA connection and a
service connection. The 1st 2 connections log in and out for every
volume. The service connection is supposed to stay connected for the
length of the backup of a server. Sometimes the server connection is
dropped when the other 2 log out. Have you tryed reordering the bacjup
so the SYS: volume backs up 1st? Sometimes this resolves E3015.

If the error continues, you might try the NWAGENT, Using the agent
does not require a service connection. No service connection, no
E3015.



On Tue, 09 Aug 2005 21:00:52 GMT, will k <wkubly@wi.rr.com> wrote:

>Hi
>
>NetWare 5.1 sp6. Arcserve 11. Backup up several volumes on a remote
>server. The data and apps vol backup just fine but the sys vol gets the
>e3015 error. I added rights for the backup ID to the volume and did a
>trustee repair. Still not working.
>
>Any clue?
>
>Thanks
>
>Will

Hi

Changed source priority and now the new last volume gets skipped. The
issue had been sys which was last which is now second and it worked.
Now data is last and it got skipped.

Any ideas?

John wrote:
> Hi Will,
>
> E3015 is usually a communications error. On remote server, 3
> connections are make, a data connection, a TSA connection and a
> service connection. The 1st 2 connections log in and out for every
> volume. The service connection is supposed to stay connected for the
> length of the backup of a server. Sometimes the server connection is
> dropped when the other 2 log out. Have you tryed reordering the bacjup
> so the SYS: volume backs up 1st? Sometimes this resolves E3015.
>
> If the error continues, you might try the NWAGENT, Using the agent
> does not require a service connection. No service connection, no
> E3015.
>
>
>
> On Tue, 09 Aug 2005 21:00:52 GMT, will k <wkubly@wi.rr.com> wrote:
>
>
>>Hi
>>
>>NetWare 5.1 sp6. Arcserve 11. Backup up several volumes on a remote
>>server. The data and apps vol backup just fine but the sys vol gets the
>>e3015 error. I added rights for the backup ID to the volume and did a
>>trustee repair. Still not working.
>>
>>Any clue?
>>
>>Thanks
>>
>>Will
>
>

Hi Will,

There seems to be an unreleased patch, T24A205, that might
resolve this issue. You can only get it from CA support.


On Mon, 15 Aug 2005 18:31:00 GMT, will k <wkubly@wi.rr.com> wrote:

>Hi
>
>Changed source priority and now the new last volume gets skipped. The
>issue had been sys which was last which is now second and it worked.
>Now data is last and it got skipped.
>
>Any ideas?
>
>John wrote:
>> Hi Will,
>>
>> E3015 is usually a communications error. On remote server, 3
>> connections are make, a data connection, a TSA connection and a
>> service connection. The 1st 2 connections log in and out for every
>> volume. The service connection is supposed to stay connected for the
>> length of the backup of a server. Sometimes the server connection is
>> dropped when the other 2 log out. Have you tryed reordering the bacjup
>> so the SYS: volume backs up 1st? Sometimes this resolves E3015.
>>
>> If the error continues, you might try the NWAGENT, Using the agent
>> does not require a service connection. No service connection, no
>> E3015.
>>
>>
>>
>> On Tue, 09 Aug 2005 21:00:52 GMT, will k <wkubly@wi.rr.com> wrote:
>>
>>
>>>Hi
>>>
>>>NetWare 5.1 sp6. Arcserve 11. Backup up several volumes on a remote
>>>server. The data and apps vol backup just fine but the sys vol gets the
>>>e3015 error. I added rights for the backup ID to the volume and did a
>>>trustee repair. Still not working.
>>>
>>>Any clue?
>>>
>>>Thanks
>>>
>>>Will
>>
>>

thanks

Will contact them, apply and report back.

John wrote:
> Hi Will,
>
> There seems to be an unreleased patch, T24A205, that might
> resolve this issue. You can only get it from CA support.
>
>
> On Mon, 15 Aug 2005 18:31:00 GMT, will k <wkubly@wi.rr.com> wrote:
>
>
>>Hi
>>
>>Changed source priority and now the new last volume gets skipped. The
>>issue had been sys which was last which is now second and it worked.
>>Now data is last and it got skipped.
>>
>>Any ideas?
>>
>>John wrote:
>>
>>>Hi Will,
>>>
>>>E3015 is usually a communications error. On remote server, 3
>>>connections are make, a data connection, a TSA connection and a
>>>service connection. The 1st 2 connections log in and out for every
>>>volume. The service connection is supposed to stay connected for the
>>>length of the backup of a server. Sometimes the server connection is
>>>dropped when the other 2 log out. Have you tryed reordering the bacjup
>>>so the SYS: volume backs up 1st? Sometimes this resolves E3015.
>>>
>>>If the error continues, you might try the NWAGENT, Using the agent
>>>does not require a service connection. No service connection, no
>>>E3015.
>>>
>>>
>>>
>>>On Tue, 09 Aug 2005 21:00:52 GMT, will k <wkubly@wi.rr.com> wrote:
>>>
>>>
>>>
>>>>Hi
>>>>
>>>>NetWare 5.1 sp6. Arcserve 11. Backup up several volumes on a remote
>>>>server. The data and apps vol backup just fine but the sys vol gets the
>>>>e3015 error. I added rights for the backup ID to the volume and did a
>>>>trustee repair. Still not working.
>>>>
>>>>Any clue?
>>>>
>>>>Thanks
>>>>
>>>>Will
>>>
>>>
>