I have a new install af NetWare 6.5 SP7 with BM 3.9.1.

When I try to run VPN (C2S), it crashes the VPNINF.NLM.
EVen if I try to run VPNCFG prior to configuration, it crashes with:

Auto-loading module VPNINF.NLM VPN SERVER COMPONENT-NetWare VPN
Control Interface Module Version 8.02.01 1 February 2008
Copyright 1996-2004 Novell, Inc. All rights reserved.
SERVER-5.70-918: Loader cannot find public symbol: IPSECRegister_v2
for module VPNINF.NLM SERVER-5.70-918: Loader cannot find public
symbol: IPSECDeregister for module VPNINF.NLM SERVER-5.70-918: Loader
cannot find public symbol: SkipRegister for module VPNINF.NLM
SERVER-5.70-918: Loader cannot find public symbol: SkipDeregister for
module VPNINF.NLM Module VPNINF.NLM load status UNRESOLVED Module
VPNCFG.NLM cannot be loaded until VPNINF is loaded Error processing
External Records. Module VPNCFG.NLM NOT loaded Module VPNCFG.NLM
load status AUTO FAIL
I have tried to re-apply SP1 and reboot, but nothing helps.

Where should I go from here?

Hi,

"Allan B. Clausen" wrote:
>
> I have a new install af NetWare 6.5 SP7 with BM 3.9.1.
>
> When I try to run VPN (C2S), it crashes the VPNINF.NLM.
> EVen if I try to run VPNCFG prior to configuration, it crashes with:
>
> Auto-loading module VPNINF.NLM VPN SERVER COMPONENT-NetWare VPN
> Control Interface Module Version 8.02.01 1 February 2008
> Copyright 1996-2004 Novell, Inc. All rights reserved.
> SERVER-5.70-918: Loader cannot find public symbol: IPSECRegister_v2
> for module VPNINF.NLM

You don't have the proper encryption suporting tcp/ip modules in place.
You should have gotten a warning about that during installation. Copy
the contents of sys:\system\tcpip\tcpd to sys:\system, then restart the
server.

CU,
--
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de